Doosan BALLOON LIGHT LED 6x100W, Operation & Maintenance Manual

Page: 15 / 36

15 BL600 LED Operation & Maintenance Manual
• Tighten the 12 screws using the cordless screwdriver
set to « torque 15 » (= about 4 Nm).
If you do not have this type of screwdriver, adjust the
torque setting of the available tool to 4 Nm.
Too high a torque setting may result in a twisted
strap.
Too low a torque setting may result in the strap being
too loose.
Figure 10
• Loosely replace the nut on the top of the envelope. Do
not tighten until after the envelope is fully inflated.
(Fig. 10)
• Close the zipper.
• Inflate the envelope.
• Tighten the nut on the top of the envelope. (Fig. 10)