Installation, Operation and Maintenance manual
9
DFPRE 4 Dust Collectors
• All auxiliary equipment.
• Live loads.
• Snow and wind loads on outside installations.
For collector weights and dimensions refer to the datasheet, publication number
DOCAM1216201.
General guidance to lifting
The collector should be lifted using either the four-point lifting arrangement or
the fork-lifting arrangement by a qualified competent person (refer to figures
2 and 3).
During all lifting operations a crane or fork lift with an adequate SWL (safe
working load) must be used. (Refer to lifting label located adjacent to lifting
points for weight of equipment supplied by Donaldson).
When using the four-point lifting method, chains or slings with an adequate
SWL (safe working load) must be used. (Refer to lifting label located adjacent
to lifting points for weight of equipment supplied by Donaldson). Chains must
be long enough to ensure that the included angle between diagonal chains is
not greater than 90° (refer to figure 2, 3 and 4)).
Care should be taken as the unit might have a high center of gravity.
Before unloading, remove all packing and strapping.
≤ 90°
≥
1.2 m
Figure 2: Four-point lifting arrangement
Figure 3: Fork lifting arrangement
