Options and Accessories
Inlet Hopper with Impact Separator
1. Lift the collector high enough to assemble.
2. Apply sealant around the impact separator toward the outside of the bolt pattern.
3.
Align the impact separator with the bottom flange of the hopper with flex hose connection oriented as desired. Fasten using
bolts, washers, and hex nuts supplied.
4.
Apply sealant around the hopper’s top flange toward the
outside of the bolt pattern.
5.
Align the top flange of the hopper with the bolt pattern on
the bottom of the collector and secure using 6mm bolts and
washers supplied.
Note: Install a 6mm bolt into every rivnut.
6.
Fasten the flexible duct to the 6-in side inlet on the impact
separator using a hose clamp.
7.
Connect opposite end of flexible duct to a customer-
supplied angular nozzle, inlet collar, or other fitting.
8. Install drain collection container as described in Drain
Collection Container.
Impact Separator and Inlet Hopper
see sealant
detail
see sealant
detail
sealant
Sealant Detail
bolt hole
impact
separator
optional drain
collection
container
hose
clamp
flexible
duct
hose clamp
hopper
Dryflo, MMA and MMB
20
