Donaldson Company, Inc.
15
Electrical installation, service, or maintenance work must be performed by a qualified electrician and comply with all
applicable national and local codes.
This equipment may start or stop unexpectedly from a remote location.
Turn power off and lock out all power before performing service or maintenance work.
The appropriate wiring schematic and electrical rating must be used. See collector’s rating plate for required voltage.
Do not install in classified hazardous atmospheres without an enclosure rated for the application.
Electrical Wiring
Lifting Information
Failure to lift the equipment or sub-assemblies
correctly can result in severe personal injury and/
or property damage.
Only qualified crane or forklift operators should be
allowed to lift equipment.
1. Use all lifting points provided.
2.
Use clevis connectors, not hooks, on lifting slings.
3.
Check the Specification Control drawing for weight and
dimensions of the collector and components to ensure
adequate crane capacity.
4. Lift collector and accessories separately and assemble
after collector is in place.
5.
Use drift pins to align holes in section flanges during assembly.
30
o
Max
60
o
Min
Typical Lifting Guidance
Correct Axis
Incorrect Axis
