Donaldson Torit DFO 2-4, Installation And Operation Manual

Page: 11 / 44

Downflo Oval, DFO 2-4 and 3-6
8
All Leg Bolt Details:
Hex Bolt
flat washer
lock washer
hex nut
Leg and Cross Brace Assembly
Leg Assembly
Leg sets are designed for standard height collectors
and are rated as shown in the Rating and Specification
Information. Reference the drawing shown below and
the leg assembly drawing shipped with the leg set for
proper location and assembly.
1. Position and assemble legs and cross braces as
shown in Leg and Cross Brace Assembly.
2. Lift the cabinet and hopper assembly into position
over the legs and lower slowly.
3. Use drift pins to align the holes in the collector with
the holes in the legs. Attach each leg as shown using
the hardware supplied. Do not tighten hardware at
this time.
4. Recheck the position of the leg sets and cross
braces.
5. Using a crane, lift the assembled unit onto the
anchor bolts. Fasten each leg pad to the anchor
bolts using flat washers, lock washers, and hex nuts
provided by others. Do not tighten hardware at this
time.
6. Level unit. Tighten all hardware on legs, cross
braces, and foundation anchors.
Tighten all hardware before
removing crane to prevent
personal injury or property damage.
NOTICE