DOMUSA Fusion Hybrid Gas Condens Installation And Operating Instructions Manual Download Page 9

Page: 9 / 76

CONTROL COMPONENTS

20.

Digital d

Digital display

isplay

This is the main boiler functioning display,
on which all the operating information,
settings and values appear.

21.

MODE

MODE button

button

This button selects between the different
operating modes. It is also used to disable
the hot water function.

22.

Button for increasing the boiler

temperature setpoint

temperature setpoint ((((

))))

It is used to increase the desired boiler
temperature.

23.

Butto

tto

tton for reducing the boile

n for reducing the boile

n for reducing the boiler

temperature

temperature setpoint

setpoint

setpoint ((((

))))

It is used to decrease the desired boiler
temperature.

24.

RESET button

When the boiler is in lock-out mode, the

RESET

button is pressed to reset the lock-

out and restore "Standard" operation. When
modifying any of the parameters, press the

RESET

SET

button to complete the screen cycle

and save the changes.

25.

Navigation increase button

Navigation increase button (((( ))))

It is used to navigate through the different
menus.

26.

Navigation decre

Navigation decrease

ase

ase button

button

button (((( ))))

It is used to navigate through the different
menus.

27.

DHW operating mode selector

DHW operating mode selector (((( ))))

With it, it is possible to select the Domestic
Hot Water operating mode.

28.

Heating

Heating operation mode selector

operation mode selector

operation mode selector ((((

))))

With it, it is possible to select the heating
operation mod.

Summary of Contents for Fusion Hybrid Gas Condens













































































Search results

Summary of Contents for Fusion Hybrid Gas Condens

Reviews:

Related manuals for Fusion Hybrid Gas Condens

Brands by name

Popular brands

DOMUSA Fusion Hybrid Gas Condens, Installation And Operating Instructions Manual

Search results

Summary of Contents for Fusion Hybrid Gas Condens

Reviews:

Related manuals for Fusion Hybrid Gas Condens

Brands by name

Popular brands