DOMUSA Fusion Hybrid Gas Condens Installation And Operating Instructions Manual Download Page 54

Page: 54 / 76

Fusion Hybrid Gas Condens

ADAPTIN

ADAPTING THE BOILER TO OTHE

G THE BOILER TO OTHE

G THE BOILER TO OTHER GAS TYPES

R GAS TYPES

As described on the date plate, the module

Fusion Hybrid

Fusion Hybrid Gas Condens

Gas Condens

is adjusted by default to run

on Natural Gas. In case of working with another type of gas, it will be necessary to change the gas.

To do this, access the

"Technical Menu"

and modify parameter

P02

Press the buttons

and

RESET

simultaneously until the circle is

completed to access the

"Technical Menu"

Select parameter

P02

P02.

Select the parameter value

P02.

•

Natural Gas:

P02

= 0

•

Propane Gas:

P02

= 1

Press

RESET

to save the entered value.

Disconnect the module. Wait 20 seconds and reconnect it to confirm
that the gas has been made changed.

The screen displays the type of gas selected.

Adapting the

Adapting the gas ty

gas ty

gas type must be carried out by a qualified p

pe must be carried out by a qualified p

pe must be carried out by a qualified professional, authorised by

rofessional, authorised by

DOMUSA TEKNI

DOMUSA TEKNIK.

It is necessary to adjust the combustion after changing the gas.

Summary of Contents for Fusion Hybrid Gas Condens













































































Search results

Summary of Contents for Fusion Hybrid Gas Condens

Reviews:

Related manuals for Fusion Hybrid Gas Condens

Brands by name

Popular brands

DOMUSA Fusion Hybrid Gas Condens, Installation And Operating Instructions Manual

Search results

Summary of Contents for Fusion Hybrid Gas Condens

Reviews:

Related manuals for Fusion Hybrid Gas Condens

Brands by name

Popular brands