manualshive.com logo in svg

DOMUSA TEKNIK Fusion Hybrid Oil, Installation And Operating Instructions Manual

Share
Download
DOMUSA TEKNIK Fusion Hybrid Oil Installation And Operating Instructions Manual Download Page 8

Fusion Hybrid Oil 

 

6 

3

 

CONTROL COMPONENTS 

 

20.

 

Heating control thermostat in boiler 

mode ( ) 

With it, it is possible the heating working 
temperature the in boiler by stopping the 

burner when the boiler temperature is equal 

to that selected or keeping it on while it is 

lower. 

21.

 

Burner and pump switch ( ) 

It allows the burner and the recirculation 
pump of the module to be switched on and 

off to maintain these two components. For 

any other operation in the rest of the 

components, it is essential to disconnect 

both the module and the heat pump from 
the power supply.  

22.

 

DHW operating mode selector ( ) 

With it, it is possible to select the Domestic 

Hot Water operating mode. 
 
 

 

23.

 

Heating operation mode selector ( ) 

With it, it is possible to select the heating 

operation mode. 

24.

 

Safety thermostat ( ) 

It ensures that the boiler temperature does 

not exceed 110ºC, stopping its operation.  

Summary of Contents for Fusion Hybrid Oil





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands