21
6.3
Operation with the DHW selector
(23)
By turning the DHW selector
(23)
to position the supporting module becomes the main energy
source for the DHW demand. The heat pump stops managing the production of DHW, leaving the
heating and production of DHW to the module. The DHW temperature for this operating mode will
become the maximum selectable in the heat pump.
In this operating mode, the display of the temperature of the DHW tank becomes
“
69
”
in a fixed way,
this being not its real temperature, as the complete management of the temperature of the DHW tank
is performed by the supporting module.
6.4
Operation with the Heating selector
(22)
For greater comfort in heating, by means of the heating selector
(22)
, it is possible to change the
operating mode and energy source that will work on the heating demand.
By turning the heating selector
(22)
to position the supporting module becomes the main energy
source for heating. The heat pump stops managing the heating demand, leaving the complete
management to the module.
The heating temperature for this operating mode will be the one selected in the thermostat
(22)
of the
supporting module, see
“Selecting the module temperature setpoint”
.”.
Summary of Contents for Fusion Hybrid Oil
