PARTS:
1. Cover handle
2. Locking cover
3. Green air went / cover lock
4. Sensor hole
5. Vent pipe
6. Quick pressure release valve
7. Sealing ring frame
8. Sealing ring
9. Fill lines
10. Removable cooking pot
11. Carrying handle
12. Green locking latch
13. Cooker body
14. Digital display
15. Cancel button
16. Control knob
17. Start button
18. Detachable power cord
19. Cord receptacle
20. Accessories
BEFORE FIRST USE
Remove all packing materials and carefully clean the appliance, the pot, the sealing ring, etc
before the first use. (See “Cleaning and maintenance”).
As received, your pressure cooker will be fully assembled. Before removing the cover, you
will need to unlock the green locking latch according to the instruction.
Place the unit preferably on a surface that is easy to clean. The surface should also be heat-
resistant. Do not place the appliance on an untreated wooden surface.
Before use, disassemble the cooker parts and clean them as recommended .
IMPORTANT INFORMATION
Be sure the bottom of the removable cooking pot and the heating plate within the
cooker body (Fig. H) are free of debris before placing the cooking pot in the cooker
body.
CAUTION! To prevent electrical shock, never use the unit without the removable
cooking pot. Also, be sure the outside of the cooking pot is completely dry before
placing it into the cooker body.
Check both the vent pipe and vent filter to be sure they are clear. In order to
check the vent pipe, you will need to remove the quick pressure release
valve from the cover (Fig. I). Then hold the cover up to the light and make
sure you can see light coming through the vent pipe. If you cannot, remove
the sealing ring frame and vent filter (see page 6) and clean the vent pipe
with a small brush or pipe cleaner to remove the blockage. Reattach the
sealing ring frame to the cover.
42
