Domino Ax Series, User Documentation

Page: 165 / 167

MAINTENANCE
EPT019297 Issue 1 November 2016 5-19
Ink Jet Alignment Check
WARNINGS: (1) Protective equipment such as gloves and glasses must be worn when
this procedure is carried out. Physical contact with printer ink or
make-up can cause skin or eye damage.
(2) The print head must be placed in a wash station, or positioned over a
beaker made of a conducting material and securely connected to
earth (ground) in case the jet is misaligned out of the gutter. The
electrostatic charges on the ink drops used for printing can cause a
fire hazard.
Check the ink jet alignment as follows:
(1) Remove the holster from the print head by pressing in the two holster retaining clips and
withdrawing the holster.
(2) Fit the print head into a wash station, or place a beaker made of a conducting material and
connected to earth (ground) underneath the print head.
(3) With the ink jet running, check the position that the ink jet enters the gutter as shown in the
following diagrams.
Ink jet
⅓
from the left side of the gutter wall.
Ink Jet Alignment Viewed from the Front