EN
PW3500
Cleaning and maintenance
25
8.3
Checking
!
➤
Frequently examine awning for imbalance, or signs of wear or damage to
cables and other critical parts.
➤
Check the awning regularly:
– Is the fabric undamaged?
– Are the arms and front cover undamaged and free from any signs of
wear?
– Does the awning close properly?
8.4
Tighten up the screws on the shoulder joint
(fig.
0
, page 6)
The screws on the shoulder joint must be tightened up after being used
initially:
z
after the first holiday using the awning
z
after driving 20000 kilometres or six months after the awning was
mounted (whichever occurs first)
The three screws on the shoulder joint also need to be checked during the
routine vehicle inspection.
Contact your service partner to tighten up the screws.
Instructions for servicing:
A
➤
Lift up the front panel slightly so that the hinge is not bearing any load.
➤
Tighten both central screws with 20 – 22 Nm.
➤
Tighten both lower screws with 16 – 18 Nm.
WARNING!
Do not operate awning if adjustments or repairs are necessary.
If you discover any damage, contact the service partner in the
respective country (addresses on the back of the manual).
NOTICE!
The awning arms must not bear any load. This is to prevent the
fastening torque of the screws from being distorted.
Summary of Contents for PerfectWall PW3500
Page 2: ......
Page 3: ...PW3500 3 1 1 2 3 4 5 2 2 1 3 1 4...
Page 4: ...PW3500 4 1 5 1 2 A B C D 1 2 6...
Page 5: ...PW3500 5 7 1 8...
