EN
Operating the awning
PW3500
18
✓
Once the new batteries have been inserted correctly, a brief beep tone is
emitted.
If this does not happen, check the positioning of the batteries.
B
Protect the environment!
Do not dispose of any batteries with general household waste.
Return defective or used batteries to your retailer or dispose of
them at collection points.
➤
Test the wind sensor (chapter “Testing the wind sensor” on page 16).
➤
If the wind sensor does not work, reprogramme it (chapter “Reprogram-
ming the wind sensor” on page 20).
6.7
Closing the awning manually in emergencies
If the awning is damaged, the motor is faulty or the power supply is unavail-
able, the awning can be closed manually.
To do this, you need the following tools:
z
Flat screwdriver
z
10-mm open-ended or ring spanner.
!
➤
Use a screwdriver to loosen the two lugs (fig.
7
2, page 5) on the left-
hand cap (fig.
7
1, page 5) and remove the cap.
➤
Turn the hexagonal shaft (fig.
8
1, page 5) clockwise with a 10 mm
open-ended or ring spanner, until the awning is fully retracted.
WARNING!
Disconnect the awning from the power before you start the proce-
dure. Otherwise the awning could start working again unexpect-
edly. The awning motor could rotate the hexagonal shaft causing
the tool to spin uncontrollably and lead to serious injury or cause
serious damage to your vehicle.
Summary of Contents for PerfectWall PW3500
Page 2: ......
Page 3: ...PW3500 3 1 1 2 3 4 5 2 2 1 3 1 4...
Page 4: ...PW3500 4 1 5 1 2 A B C D 1 2 6...
Page 5: ...PW3500 5 7 1 8...