EN
Mounting the Micro Heki
Micro Heki
8
See fig.
7
➤
Check the direction of travel when installing.
➤
Place the outer frame in the middle of the roof opening.
➤
Press the outer frame in the roof slightly so that the packing compound spreads
out.
See fig.
8
➤
Wall thickness 23 – 42 mm:
Attach the outer frame with the appropriate instal-
lation kit.
➤
Wall thickness 43 – 60 mm:
Attach the outer frame with the adapter frame and
the appropriate installation kit. Use the screws included in the scope of delivery
of the adapter frame.
➤
Tighten the screws 10 minutes after installation.
See fig.
9
➤
Mount the fastening brackets on the internal frame.
See fig.
0
➤
Push the inner frame onto the outer frame.
➤
After installing, check the roof light works properly.
I
➤
Remove the protective film from the acrylic glass.
➤
If necessary, enter the new vehicle height and weight in the vehicle documents.
NOTE
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
Micro-Heki--IO-16s.book Seite 8 Dienstag, 13. Februar 2018 5:56 17
