EN
Instructions before installation
Micro Heki
6
6
Instructions before installation
➤
Before installation, check the roof thickness of your vehicle. Consult the vehicle
manufacturer if you have any questions.
➤
When choosing the installation location, observe the following:
–
Adjoining components (roof rack or attachment and reinforcing parts), cables
and cabinets in the vehicle interior must not get damaged when sawing the
hole.
–
Sufficient space needs to be available for installing the inner and outer frames.
–
Only fit the roof light on flat and parallel interior and exterior roof areas with a
maximum inclination of 15° to the horizontal.
–
You may use an existing roof hole provided the roof light fits into it.
6.1
Pressing out the hole
See fig.
2
6.2
Using reinforcing rails
Supplementary to fig.
3
➤
Before installation, check whether the roof hole needs reinforcing.
➤
Remove the foam according to the width of your reinforcing rails (not in scope of
delivery) (
A
).
➤
Fit the reinforcing rails (
B
).
Micro-Heki--IO-16s.book Seite 6 Dienstag, 13. Februar 2018 5:56 17
