Dometic Go Power! C Series, User Manual

Page: 19 / 34

gpelectric.com | [page 19]
4.3 SHORE POWER MAX MENU
Menu Heading Selections / Adjustments Range Default Setting
Shore Power Max 5 - 50A 30A
The shore power max menu enables the user to quickly change your shore max setting to coordinate with the circuit breaker rating
from the incoming AC source. This setting ensures the AC loads receive the maximum current available from the utility / generator.
When the total current used to power the AC loads (appliances) and charge the batteries begins to approach the shore pow max setting,
the current that was used for charging the batteries is reduced. This ensures the AC loads have the required current to keep operating.
Set the shore power max setting to match the current rating of the utility power or the generator’s circuit breaker. If you are using two
AC Input sources (utility and generator) to the
Inverter/Charger
through an external transfer switch, adjust the shore max setting to the
smaller AC circuit breaker size of the two AC power sources.
The IC Series has 2 inputs (AC HOT 1 and AC HOT 2), but the current is only monitored on AC HOT 1. If you wire the Inverter/Charger
in Single In - Single Out (50A) configurations (see the IC Series user manual) the shore power max setting should be set to 1/2 the
input breaker size, which will be 25A (50A/2 = 25A). This is because half the current will pass through AC HOT 1 and the other half
through AC HOT 2 simultaneously.
SHORE POWER
UNIT READINGS
INVERTER
ON/OFF
CHARGER
ON/OFF
ENTER / SET BACK
UNIT SETUP
REMOTE SETTINGS
®
SHORE POWER
UNIT READINGS
INVERTER
ON/OFF
CHARGER
ON/OFF
ENTER / SET BACK
UNIT SETUP
REMOTE SETTINGS
®
SHORE POW. MAX
25.0
SHORE POW. MAX
30.0
SHORE POWER
UNIT READINGS
INVERTER
ON/OFF
CHARGER
ON/OFF
ENTER / SET BACK
UNIT SETUP
REMOTE SETTINGS
®
SHORE POWER
UNIT READINGS
INVERTER
ON/OFF
CHARGER
ON/OFF
ENTER / SET BACK
UNIT SETUP
REMOTE SETTINGS
®
SHORE POW. MAX
0.0
SHORE POW. MAX
25.0
“ENTER MENU”
“SET”
(Save value)
“MODIFY UP”
“MODIFY DOWN”
SHORE POWER
UNIT READINGS
INVERTER
ON/OFF
CHARGER
ON/OFF
ENTER / SET BACK
UNIT SETUP
REMOTE SETTINGS
®
DC Status
11.68 V
0.0 A
AFTER SAVING
REMOTE WILL GO BACK TO
“DEFAULT HOME SCREEN”
OPERATION