[page 14] | gpelectric.com
a. Screwdriver (Phillips)
b. Keyhole saw
c. Pencil or marker
d. Electric hand drill and drill bits
e. Zip ties
3.2 UNIT DIMENSIONS
3.3 MOUNTING REQUIREMENTS
The GP-ICR-50 control must be installed in a location that is clean dry and protected. Make sure the LCD screen is visible and access
to the menu navigation buttons is clear and un-obstructed. Always check for hidden electrical wires, pipes and cables before drilling,
cutting or screwing into walls / cabinets.
3.4 INSTALLATION TOOLS
SHORE POWER
UNIT READINGS
INVERTER
ON/OFF
CHARGER
ON/OFF
ENTER / SET
BACK
UNIT SETUP
REMOTE SETTINGS
®
2.7”
(69mm)
1.22”
(31mm)
3.9”
(98mm)
3.3”
(83mm)
5.2”
(133mm)
5.9”
(149mm)
4.7”
(120mm)
INSTALLATION
Summary of Contents for Go Power! C Series
Page 31: ......
