EN
Installation
FreshJet
10
8.2
Making a new opening
See fig.
3
➤
Select an area at the centre on the roof between two longitudinal supports.
➤
Mark the position and size of the opening using the template included in the
packaging (
A
and
B
).
See fig.
4
➤
Drill out the corners (
A
).
➤
Carefully cut out the opening on the roof using a keyhole saw or a similar tool (
B
).
Make sure no electrical power cables are damaged.
See fig.
5
➤
Before installation, check whether the roof hole needs reinforcing.
➤
Remove the foam according to the width of your reinforcing rails (not in scope of
delivery) (
A
).
➤
Fit the reinforcing rails (
B
).
8.3
Installing in a roof hatch opening already provided
I
See fig.
6
➤
Remove all screws and fixtures of the existing roof hatch.
➤
Take out the roof hatch.
See fig.
7
➤
Remove the sealant around the opening using a scraper or similar tool.
NOTE
•
Existing roof hatch openings in accordance with fig.
3
are suitable
for installing the roof air conditioner.
•
Dispose of all waste material, glue, silicone and seals separately.
Observe the disposal guidelines.
•
The manufacturer only assumes liability for parts included in the
scope of delivery. The validity of the warranty expires if the device is
installed together with third-party parts.
FreshJet-ADB2015_INM_EMEA16.book Seite 10 Dienstag, 3. September 2019 4:33 16
