EN
Installation
FreshJet
16
Keys to fig.
h
:
See fig.
b
230 V
w
cable
➤
Connect the roof air conditioner with the 230 V
w
voltage supply.
Connect the cables (
1
) to a cable connector (
2
).
Remote light switch (not included in the scope of delivery)
You can connect the lighting to a remote light switch. This enables you to switch on
the lighting remotely.
To do this, proceed as follows:
➤
Disconnect the 2-pin plug (
6
) from the socket on the circuit board of the air outlet
unit.
➤
Connect the two cables of the remote light switch to the 2-pin plug (
5
).
➤
Insert the 2-pin plug (
5
) into socket on the circuit board (
6
).
12 V
g
cable
You can connect the lighting to the battery. This enables you to switch on the lighting
even if the 230 V
w
voltage supply is not connected.
To do this, proceed as follows:
➤
Connect the positive cable and the negative cable with the battery.
Connecting the circuit board
➤
Insert the 12-pin plug (
3
) in the socket (
7
) on the circuit board of the air outlet unit.
➤
Connect the 2-pin connector plug (
2
) to the wire from CI-Bus master panel
(optional).
Item
Description
1
Remote light switch
2
Circuit board of the air outlet unit
FreshJet-ADB2015_INM_EMEA16.book Seite 16 Dienstag, 3. September 2019 4:33 16
