31
3.2.3. Replacing thermostat
- Dismount cooling flange
(see 2.4.1)
- Wind off insulation tape securing thermostat capillary, straighten capillary.
(Figure 112,113)
- Pop out wire plug from thermostat switch, pull off thermostat switch from
the thermostat switch’s axis with a universal plier with protective coating.
(Figure 114,115)
- If the gasket slips off of the thermostat switch, remove it from the bore with
a magnetic screwdriver, detach it to the driving bolt. Reinsert the plug into
the bore, set aside switch.
(Figure 116,117)
Figure 112
Figure 113
Figure 114
Figure 115
Figure 116
Figure 117