EN
Installing and connecting the DC kit
DC-Kit1
10
Note the following safety instructions during installation:
A
Observe the following safety instructions for the electrical connections:
A
Observe the following instructions when selecting the location for installing the
components:
•
Make sure the cables are of the correct length.
•
Choose a well-ventilated installation location near the supply battery.
7.1
Preparing the installation
➤
Disconnect the following voltage supplies in the vehicle:
–
Positive battery terminal
–
External voltage supply
NOTICE!
•
Note the location of wiring harnesses, wiring and other components
within the installation area.
•
Install the DC kit using the following instructions. Improper installa-
tion of the DC kit can put the safety of the user at risk and lead to
irreparable damage to the DC kit or other devices.
•
Disconnect all power supply lines to the individual components and
the roof air conditioner.
NOTICE! Risk of short circuit!
•
First, disconnect the 230 V external power supply to the caravan.
•
Disconnect the earth connection to the supply battery.
•
Disconnect the connection to the starter battery.
•
If you have to feed cables through metal walls or other walls with
sharp edges, use ducts or tubes to prevent damage.
•
Do not lay cables which are loose or bent next to electrically
conductive material (metal).
•
Fasten the cables securely.
•
Ensure the 12 V cables are especially well-protected.
•
Check whether you need to fit any additional fuses.
•
Do not pull on the cables.
•
Do not lay the 230 V mains cable and the 12/24 V DC cable in the
same duct.
•
Lay the cables so that they cannot be tripped over or damaged.
DC-Kit1--IO-16s.book Seite 10 Dienstag, 21. März 2017 2:05 14
Summary of Contents for DC-Kit1
Page 2: ...DC Kit1 2 CA1000 1 A B C 2 ...
Page 3: ...DC Kit1 3 1 3 I1 I3 I2 I4 I5 4 ...
Page 4: ...DC Kit1 4 FreshJet 5 6 ...