EN
BC100, BC 200
Safety instructions
7
2.2
Safety when connecting the device electronically
!
WARNING!
•
Always use sockets which are grounded and secured by residual cur-
rent circuit breakers.
•
Lay the cables so that they cannot be damaged by the doors or the
bonnet.
Crushed cables can lead to serious injury.
!
CAUTION!
•
Lay the cables so that they cannot be tripped over or damaged.
2.3
Operating the device safely
D
DANGER! Danger of electrocution
•
Do not touch exposed cables with your bare hands. This applies espe-
cially when operating the device from the AC mains.
•
To be able to disconnect the device quickly from the mains, the socket
must be close to the device and be easily accessible.
!
CAUTION!
•
Do
not
operate the device
–
In salty, wet or damp environments
–
In the vicinity of corrosive fumes
–
In the vicinity of combustible materials
–
In areas where there is a danger of explosions.
•
Before starting the device, ensure that the power supply line and the
plug are dry.
•
Always disconnect the power supply when working on the device.
•
Please observe that parts of the device may still conduct voltage even
if the fuse has blown.
•
Do not disconnect any cables when the device is still in use.
A
NOTICE!
•
Ensure good ventilation.
MBCC-100-200--O-16s.book Seite 7 Montag, 21. November 2016 10:01 22
Summary of Contents for BC100
Page 2: ......
