EN
AP Remote
Operation
5
5.4
Skysol Powered Roofblind and Skyscreen Powered
I
Proceed as shown:
•
Pairing or un-pairing the blind to AP Remote: fig.
Note:
Ensure only the receiver for the blind being paired is connected to the
power supply and any other blind‘s receivers are disconnected.
•
Changing the direction of blind: fig.
Note:
Un-pair or disconnect from the power supply any other receivers on the
same channel. After changing the direction of the blind reconnect or re-pair
those receivers.
•
Operating the blinds
–
D2 blind type: fig.
–
DM blind type: fig.
–
SO and S1 blind types: fig.
–
S2 blind type: fig.
5.5
Changing the batteries
Observe the following notes on batteries:
•
Do not mix battery types.
•
Replace both batteries at he same time.
•
Remove batteries when AP Remote will be left unused for long periods.
➤
NOTE
In the figures the channels 1 and 2 are depicted as example for blind 1
and 2, respectively. The setup for channels 3 through 9 is done
accordingly.
AR-Remote_IOM_EMEA16.book Seite 5 Mittwoch, 6. November 2019 3:15 15
