EN
MSI924M
Connecting the inverter
39
9.2
Connecting the inverter to the battery
I
➤
Set the main switch (fig.
5
1, page 4) to “OFF”.
➤
Loosen the screw (fig.
6
1, page 5) from the red positive terminal
(fig.
6
2, page 5).
➤
Push the cable lug (fig.
6
2, page 5) of the positive cable into the red
positive terminal and fasten it with the screw.
➤
Connect the negative cable to the black negative terminal (fig.
6
4,
page 5).
➤
Lay the positive cable from the inverter to the positive terminal of the
vehicle battery and connect it.
➤
Lay the negative cable from the inverter to the negative terminal of the
vehicle battery and connect it.
➤
Connect the earth terminal to the vehicle chassis.
9.3
Connecting the MCR9M remote control (accessory)
A
➤
Connect the remote control (accessory) to the remote port (fig.
4
2,
page 4).
NOTE
Tighten the nuts and bolts to a maximum torque of 12 – 13 Nm.
Loose connections may cause overheating.
NOTICE!
Only plug in the connection to the remote control in the remote
port. The device can be damaged by connecting it incorrectly.
Ensure that the remote control and inverter are supplied with
the same input voltage.
Follow the instruction manual of the remote control.