1
Precaution
、
1
Precaution
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Law
Environmental requirements
Cleaning of down cover
1.The product installation and use of the product must comply with the relevant laws of the country.
C power supply. About the rated inputting
voltage, please refer to power label.
1.when the image is unclear or there is so much dust on the down cover, please use soft cloth to clean or please
use the water to wash the down cover and then wipe up.
Electrical safety
Transportation
Installation of care
Requirements to service personnel
Do not disassemble the pan/tilt module
Don't place lens of the camera to strong light objects
1.Strictly conform to country and local electrical safety standard when using or installing the product.
2.Using factory's power adapter. This dome uses 24VA
1.The dome should be protected against extremes of pressure, vibration humidity and other damage during
storage and transportation.
2.The dome should be shipped in parts disassembled as the original integrated packing during the transportation.
Damage caused by improper transportation is not within the warranty.
1. Please refer to user manual when installation, and sufficient strength of the wall or ceiling should be ensured .
2. Power must be cut off when installation.
3. Please handle with care ,do not squeeze and press structure parts, which may cause mechanical damage.
4. Down cover and lens of camera are precise optical items. Please don't touch it directly to avoid scratch
which will affect the image quality.
1.All the service work should be done by qualified technicians.
(like sun etc.)
=
Operation environment temperature
：
℃
℃
：
：
-30
-+50
Humidity
< 90%
Air pressure
86-106Kpa
Please read the manual and product label carefully before installing the speed dome.
