The dome conducts self-testing after current-carrying,and it rotates slowly until displaying pan origin that is default
setting, then moving to tilt origin, the lens will be pulled far to near and near to far, when self-testing is finished, there
is relevant system information displaying on the screen, as follow:
The system enters into the main menu by 95preset or twice transfer 9 preset within 3 seconds . All the menu setting must
enter into the main menu at first.
5.1.2 Call the main menu
5
Ø
Ø
The information will not disappear until you stop to operate the system. If you set
power up action
, the dome
will automatically activate motions after self-testing. How to operate the function? We will explain detail introduction
in following passages.
You need input password when you sign in the menu if you set up password and have
a super- password for the time of forget the password (super-password "892226"), then the password will turn to factory
setting (original password"000000". You need set the password again if you need it, the detail of information show in
password setting 6.7.
: it means camera rotate up as pan/tilt controlling, it means to choose the former item as menu
choosing
: it means camera rotate down as pan/tilt controlling, it means to choose the next item as
menu choosing
: it means camera rotate left as pan/tilt controlling, it means to exit and not to save as menu
choosing
: it means camera rotate right as pan/tilt controlling, it means to save the settings as menu
choosing
Back
: Back to the former menu
Exit
: Exit to menu
“
”
.1.3 Ba
Basic operations:
Menu operation
sic operations of video server controlling software
Rotate up
Rotate down
Rotate left
Rotate right
“
”
“
”
5. 1 Basic operation
5.System setting
System setting
5.1.1 Current-carrying to dome and self-testing
On
: Open some setting
Off
: Close some setting
“
”
“
”
S/N of the dome
Soft edition
Dome ID
Communication parameter
Protocol
9