EC – Controller Compacto
DOMEL
11
Operating and installation Instructions
V2.2, April 2015
4. STRIPPING CONNECTING LEADS AND CONNECTING WITH TERMINALS
Use shield / armoured motor cable to comply with EMC emission specifications, and connect
this cable to both the decoupling plate and the motor metal.
Use only hard wire or fibre copper wire with ferrule (Fig 1). For thickness of the wire, see the
table 2.
Keep motor cable as short as possible to reduce the noise level and leakage currents. To
reduce the operating problems, use a shielded cable. Max length of cables shown the table
below.
Fig.1: Wire with ferrule
Table 1: Length of cables
Fig.2: Description of cables
Compacto
Length
max [m]
Power supply
-
Relay Fault
-
Set RPM via
voltage
-
Set RPM via
potentiometer
20
Speed Output
-
Fire mode
40
Start/Stop
40
Modbus
40
Motor
5
