EC – Controller Compacto
DOMEL
13
Operating and installation Instructions
V2.2, April 2015
Fig.4: How to operate correctly with terminal strips
Warning!
Press only 0.
5kg max, 4mm deep at angle 45° with 3mm slot screwdriver.
Damaged terminal strips could cause fatal damage on the Controller and could
cause fatal injury from electric shock.
Note!
It is the responsibility of the user or installer to ensure correct
grounding and protection in accordance with national and local
standards.
4.2.
Connecting the electrical system
Check whether the data on the type plate agrees with the connection data.
Before connecting the device, ensure that the supply voltage matches the operating voltage of
the device.
Only use cables that are configured for the current according to the specification on the type
plate.
4.2.1. Mains supply connection and fuse protection
Compacto
Drive Type
Nominal
voltage
Nominal
output
power
Safety fuse
Cable cross - section
mm
2
AWG
Power supply
08
230V
800W
10A
2,0-2,5
13
User control
0,5 - 2,5
20 - 13
Power supply
11
230V
1100W
10A
2,0-2,5
13
User control
0,5 - 2,5
20 - 13
Table 2: Thickness
of wire
