ENiQ® Wall Readers & Terminals
r
_____________________________________________________________________________________
6
Scope of supply
Depending on the order:
ENiQ AccessManager® Compact / ENiQ AccessManager® Terminal Compact
Unit comprises controller and reader, mounting frame, screw set, cover and
diode
ENiQ AccessManager® HiSec / ENiQ AccessManager® Terminal HiSec
Controller, mounting frame, screw set, cover and diode as well as
reader with mounting frame, screw set and cover.
ENiQ AccessManager® ITT
Unit comprises controller and reader, mounting frame, screw set, cover and
diode
ENiQ
®
Module Reader
Controller and reader in one device, mounting frame, screw set, cover and diode for
the controller as well as an external reader without accessories.
ENiQ
®
Passive Reader
reader with mounting frame, screw set and cover.
Additionally available components
USB RF-stick
Master card
Programming card
Locking medium
Permanent open card/day, permanent closed card/day
Surface mounting frame incl. screw set each including:
4 Spax screws 3 x 25, Phillips fillister head
4 washers and 4 dowels S4
Required components that are not supplied by DOM:
Standard outlet sockets if not mounted on wall with surface mounting frame.
Depending on the external reader variant (click-type or screw attachment) of the
ENiQ Module Reader, no screws are included. The screw hardware must be
purchased from the respective manufacturer, depending on the module. Tip:
Inform the manufacturer of your module about your plans to use the reader in
the module. This way, the manufacturer can prepare the recesses and screwing
points for the reader.
Some models of the ENiQ Module Reader are offered as surface mounted
variants. A surface mounting frame is not included. You can purchase a surface
mounting frame for your external reader (if surface mounting is possible) through
our supplier, phg Peter Hengstler GmbH + Co. KG in Deißlingen, Germany.