4
|
Dolphin Blue
|
BCL
632F
PRE INSTALLATION INFORMATION
C H E C K C O N T E N T S
After opening the package, check each part with the “Pack Contents” section.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install the touch free foam soap
dispenser until you obtain the missing parts.
WA R N I N G S
› Highly reflective surfaces directly beneath the sensor of this product, in
particular polished finish basin wastes/ strainers, will cause false activation of the
infrared sensors and can result in malfunction. We recommend satin or matt
finish products which can be found on our website.
› It is very important to allow permanent access to the mounting tail/nut of this
product for future servicing and repair. Where this is not possible see our wall
plate mounted products.
› Do not install the system facing a mirror or any electronic system operated by
an infrared sensor.
› To prevent reflection problems, it is recommended to keep a minimum
distance of 300 mm between the soap dispenser and any other objects.
I M P O RTA N T :
Keep in mind that when using the tap installed next to the soap dispenser, the
user hands should not interfere with the soap dispenser sensor detection area.
Correct Installation
Incorrect Installation
Do not aim soap sensor at water stream
