6
|
Dolphin Blue
|
BCL
632F
INSTALLATION
S T E P 1 R E M O V E A L L M O U N T I N G H A R D WA R E
› Drill a hole (23-24 mm) at the
designated installation location of the
foam soap dispenser body.
› Drill a small hole (2-3 mm) above
the previous one for the anti-
rotation pin. Consult the diagram.
› Remove the hexagonal nut and the
disk from the base of the soap
dispenser spout.
S T E P 2 – I N S TA L L I N G
T H E S O A P D I S P E N S E R
1. Insert the Soap dispenser base and
the anti-rotation pin into the drilled
holes. Fix the base behind the wall
with the hexagonal nut and the
disk.
2. Fix the bottle support to the
desired location. The pump MUST
be within reach range of the Com
cable and black supply tube.
