10
|
Dolphin Blue
|
BCL
632F
REMOTE CONTROL FUNCTIONS
If available, the foam dispenser remote control can adjust the dispenser’s settings. To
use the remote control hold it in front of the sensor at a distance of 10-15cm.
Attention:
The remote control will not operate out of the recommended range
(too closeor too far).
The remote control can be used to adjust the following functions:
1 SOAP QUANTITY
Press the + sign on the SOAP button to increase the soap
quantity by increasing the dispensing time. Press the - button to decrease it.
Indication:
continuous blinking blue light in the sensor eye.
2 AIR QUANTITY
To improve soap consistency (“foamability) change the
amount air to be mixed. Press the + sign on the AIR button to increase the air
quantity and the - to decrease it.
Indication:
2 blinks of the blue light in the
sensor eye.
3 RES
This function resets the sensor back to its factory settings.
4 TEMPORARY OFF FUNCTION
This function temporary disables the
dispenser. Use this function to preform maintenance in front of the sensor
without activating the system (for
example: cleaning) The soap dispenser
will shut off for one minute after this
button is pressed once. To return to
normal operation before the minute is
over, press the On/Off button again.
5 FILL THE SOAP TANK
Once the soap
tank has been filled \ refilled, press the
FILL button. The pump will run for one
minute, priming the piping with soap.
Once soap begins dispensing from the
spout, priming is complete. press the FILL
button again to stop the priming before
the minute is over.
Indication:
continuous
solid blue light in the sensor eye.
