Dolphin Dolphin Blue BCL632F, Installation And Maintenance Manual

Page: 15 / 16

TROUBLE SHOOTING
SOLUTION CAUSE INDICATOR PROBLEM
Connect the connectors
properly so that the white
o-ring is not visible. The connectors between the pump
and the electronic unit are not
connected properly.
Foam does not
stop dispensing
Increase air ratio using the
remote control.
Refer to page 8
Air ratio is too low.
Foam is too
diluted
Decrease air ratio using the
remote control.
Refer to page 8
Air ratio is too high.
Foam is too
dense
Connect the connectors
properly so that the white
o-ring is not visible. The connectors between the soap
pump and the compressor are not
connected properly.
Blue light flashes
(once) and the
foam compressor
operates.
Soap dispenser
pump does not
work
Connect the connectors
properly so that the white
o-ring is not visible. The connectors between the
compressor and the electronic unit
are not connected properly. Blue light flashes
(once) and the
motor operates. Foam
compressor
does not work
BC 632F
| Dolphin Blue | 15