
EN 35
MAINTENANCE
6.
MAINTENANCE
6.1 SAFETY RECOMMENDATIONS
Before cleaning, maintenance or repair work, take out
the ignition key and read the relevant instructions. Wear suitable clothing
and strong gloves when dismantling and refitting the blades and in all
other hazardous situations for hands.
Never use the machine with worn or damaged parts.
Faulty or worn-out parts must always be replaced and not repaired. Only
use genuine spare parts: those that are not of an equivalent quality may
damage the machine or endanger the safety of yourself and others.
Never get rid of used oil, fuel or other pollutants in unautho-
rised places!
6.1.1 L
IFTING THE MACHINE VERTICALLY
If you need to have easy access to the lower part of the machine it is possible to
lift it vertically.
Place the machine on
firm and flat ground. At least two com-
petent people should be involved in this
operation to assure necessary safety.
Make sure that the tank does not contain
more than 2 litres of fuel and insert a block of
around 120 mm beneath the rear plate.
Lift the machine from the front, being careful
to hold onto parts that offer a firm grip, and
rest it on the points shown, taking care not
to damage the grass-catcher brackets or the
plastic parts.
Check that the machine is stable before doing any work
!
DANGER!
!
WARNING!
IMPORTANT
!
WARNING!
!
WARNING!
1
1
1
120 mm
Summary of Contents for TM-92.14-H
