EN 48
TROUBLESHOOTING
PROBLEM
LIKELY CAUSE
SOLUTION
12.
Unusual vibrations
while working
13.
With the engine
running, the machine
does not move when
the drive pedal is
pressed
( for
hydrostatic drive mod-
els)
➤
– the blades are imbalanced
– blades loose
– fixing bolts loose
– disengage lever in position «B» (
☛
4.33)
– balance or replace any damaged
blades (
☛
6.3.1)
– check that the blades are firmly fitted
(
☛
6.3.1) (remember the left-hand
thread of the right-hand blade)
– check and tighten all the fixing bolts
of the engine and frame
– put into position «A»
If problems continue after having carried out these operations, contact a
Licensed Service Centre.
Do not take on complicated repair work if you don't
have the necessary equipment and the technical knowledge. The guar-
antee is automatically revoked and the manufacturer declines all
responsibility for any repairs which are badly done.
!
WARNING!
Summary of Contents for TM-92.14-H
