Dolmar TM-92.14-H, Operator'S Manual, Page: 70 / 257

EN 18 CONTROLS AND INSTRUMENTS
For hydrostatic drive models:
4.31 B
RAKE PEDAL
This pedal works the brake on
the rear wheels.
4.32 D
RIVE ENGAGEMENT PEDAL
This pedal engages drive in the
wheels as well as modulating
the machine's forward and
reverse speeds.
– To engage forward drive just
press it in the «F» direction
with your toe-cap, noting
that increasing the pressure
on the pedal progressively
increases the speed of the
machine.
– Reverse is engaged by
pressing the pedal with the
heel, in the «R» direction.
– The pedal automatically
goes into neutral «N» when
released.
Reverse must only be engaged when the machine is
stopped.
If the drive pedal is used, whether forwards or for reverse,
when the parking brake (4.4) is engaged, the engine stops.
4.33 L
EVER TO RELEASE THE HYDROSTATIC TRANSMISSION
This lever has two positions as shown on the label:
« A » = Transmission engaged: for all usage conditions, when moving and dur-
ing cutting;
« B » = Transmission released: considerably reduces the effort required for
moving the machine by hand, with the engine turned off .
To avoid damaging the transmission unit, this operation
must be carried out only when the engine has stopped with the pedal (4.32)
at position “N”.
IMPORTANT
NOTE
!
WARNING!
➤
4.32
4.33
4.31
N
F
R
B
A