Dolmar MS-26 C, Instruction Manual

Page: 11 / 156

11
To meet the applicable safety standards, you must only use the tool/protector
combinations indicated in the table.
Always use genuine DOLMAR cutter blades/nylon cutting head.
– The cutter blade must be well polished, and free of cracks or breakages. If the
cutter blade hits against a stone during operation, stop the engine and check
the blade immediately.
– Polish or replace the cutter blade every three hours of operation.
– If the nylon cutting head hits against a stone during operation, stop the engine
and check the nylon cutting head immediately.
CAUTION: The appropriate protectors must always be installed for your own
safety and in order to comply with accident-prevention regulations.
Operation of the equipment without the guard installed is prohibited.
– Fix the protector (1) to the clamp (3) with two M6 x 30 bolts (2).
– When using the string head, fit the protector (6) into the protector (1), and
tighten them with two nuts (5) and two screws (4).
Mounting the protector
Star Blade Eddy Blade Protector for metal blades Nylon cutting head Protector for cord cutter
PART NO. 6258507600 PART NO. 6258507700 PART NO. 6258065000 PART NO. 6218016000 PART NO. 6258064000
(2)
(3)
(1)
(4)
(1)
(6)
(5)