Dolmar HT-2460, Instruction Manual

Page: 7 / 132

7
TECHNICAL DATA
Model
HT-2460 HT-2475
With Chip
Receiver
With Chip
Receiver
Dimension (L x W x H) mm 1,010 x 323 x 212 1,150 x 323 x 212
Mass (without blade cover) kg 4.5 4.7 4.7 4.9
Volume (fuel tank) L 0.4
Engine displacement cm 3 22.2
Cutting length mm 588 728
Maximum engine performance kW 0.68
Maximum blade speed min
-1
4,390
Idling speed min -1 3,000
Clutch engagement speed min
-1
4,000
Carburetor type type WALBRO WYL
Ignition system type Solid state ignition
Spark plug type NGK CMR6A
Electrode gap mm 0.7 - 0.8
Vibration per
ISO 10517
Right handle
a
hv eq
m/s
2
3.6 3.1 3.2 3.0
Uncertainty K m/s
2
1.23 0.80 0.25 0.44
Left handle
a
hv eq
m/s
2
2.8 2.7 3.5 3.3
Uncertainty K m/s 2 0.66 0.47 0.52 0.69
Sound pressure level average according to ISO 10517 dBA 92.7 94.3
Sound power level according to ISO 10517 dBA 100.5 101.8
Mixture ratio (fuel: DOLMAR 2-stroke engine oil) 50 : 1
Gear ratio 9 : 43
1) The data takes equally into account the idling and racing speed operating modes.
EC-DECLARATION OF CONFORMITY
Petrol Hedge Trimmer: model HT-2460, HT-2475
(See TECHNICAL DATA for the specifications)
We declare under our sole responsibility that this product is in compliance with the following Directives, 2000/14/EC, 2006/42/EC.
The most important standards applied to properly meet the requirements of the above Directives were: ISO 10517.
Measured Sound Power: 102.7 dB (A)
Guarantee Sound Power: 105 dB (A)
These sound power levels wear measured in accordance with Council Directive, 2000/14/EC.
Conformity assessment procedure: Annex V.
19. FEB. 2010
Tamiro Kishima Rainer Bergfeld
Managing Director Managing Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
DOLMAR Gmbh
Jenfelder Str. 38, 22045 Hamburg, Germany
Tamiro Kishima Rainer Bergfeld