Doka 150F, Instructions For Assembly And Use, Page: 29 / 68

User Information Climbing formwork 150F Operating the formwork
29 999775002 - 02/2020
Plumbing & aligning the formwork
Adjusting the formwork
In order to permit exact adjustment of the formwork ele-
ments in relation to one another and to the structure,
they are adjustable in both the vertical and the horizon-
tal.
Tools needed:
▪
Hammer
▪
Reversible ratchet 1/2"
▪
Box nut 24 1/2" and
▪
Fork wrench 22/24 (for the threaded joins on the
adjusting spindles)
Preparing the adjusting operation
➤
Detach the fixing-wedges (B) .
➤
Release the pressure wedge (A) .
➤
Detach the formwork from the concrete.
➤
Loosen the Waling-to-bracket holders (B) with a
blow of the hammer.
The adjusting spindles (C) permit a vertical adjust-
ment range of approx. 150 mm. Also, the adjusting
spindles can be relocated in the hole-grid of the Vertical
waling (D) .
Vertical adjustment
➤
Turn both adjusting spindles.
E Timber wedges in the multi-purpose walings (near the adjusting
spindles – for ensuring better load transfer)
B
9775-203-01
A
9775-205-01
9710-309-03
D
C
B
E
While adjusting the height, watch the waling-
to-bracket holders to make sure that they do
not jam and block the adjustment process.
9775-234-02