18
DE-1008.5 PUMP TUBE INSTALLATION
AND REPLACEMENT
7.
Remove the pump tube.
8.
Install the new pump tube by pressing in the silver tab on one of the
fittings on the bottom of the enclosure.
9.
Push end of the tube into the hole until you hear it
CLICK
into place.
10.
Stretch the tube across the pump rollers.
11.
Press the silver tab on the other fitting on the bottom of the enclosure.
12.
Insert the tube end into place and making sure it
CLICKS
into place.
13.
After the tube is securely in place, verify the tube is centered over the
rollers, adjust if needed, and close the pump lid.
14.
Close the pump enclosure door.
15.
Lastly, turn the ¼ turn latches to the right.
16. DONE!
NOTE: Double check tubes are securely in place, failure to do so may result in
product pumping inside the enclosure causing NON-WARRANTY damage.
Part Number: 1008.5-PT-BL = 1008.5 Series
(Dohrect Enject) Pumping Tube
– BLUE
Part Number: 1008.5-PT-RD = 1008.5 Series
(Dohrect Enject) Pumping Tube - RED
