10
With the BigLeash, you have the option of using the “
A
” Button for either an
Audible
signal or a
Vibration
signal. The mode you select will depend on
your dog and your personal preference.
When working with 2 dogs, the two collars are set independently.
To Switch Between Audible and Vibration:
■
Turn the transmitter and the receiver collar “on”. Set to Collar 1 or Collar 2,
as appropriate.
■
Set the training level to “0”.
■
Hold the “A” button
with the training level at
“0”
.
Continue holding the “A” button. After ~5 seconds, the transmitter will begin
to toggle between Audible (A) and Vibration (V). The mode will display on
the LCD screen.
➜
To set to
Audible
, release the “A” button while the “A” is displayed.
➜
To set to
Vibration
, release the “A” button while the“V” is displayed.
■
To test the setting, return the transmitter to any training level (1-15) and
press the “A” button.
*
■
The “A” button will remain set to either Audible mode or Vibration mode until
you change it. Collar 1 and Collar 2 are set and changed independently.
Audible and vibration are always the same intensity regardless
of the training level setting, except when set to “0” (no signal).
Switching from Audible to Vibration Mode
