35
34
1. Using a screwdriver, remove the
3 screws on the battery cover on the
back of the transmitter.
2. Replace the batteries with two AAA
1.5V alkaline batteries. Check that
the batteries match the polarity
indicated on the battery holder.
3. Place the battery cover back into
place and use a screwdriver to
tighten the screws back on.
4. To make sure that the transmitter is
working properly, press one of the
buttons to see if the LED indicator
light shows up green.
10. REPLACING THE TRANSMITTER BATTERY
+
- +
-
Caution!
If you tighten the screws too much,
it will strip the screws and spin.
The maximum range for the BALL TRAINER is 90 metres, which can vary
depending on the way you use your transmitter. It may also vary depending on
geographical conditions and the surrounding environment.
To get the greatest range, follow the instructions below.
- To improve the range, hold the transmitter in your hand and do not block the
top of the transmitter (there is an internal antenna).
- Get the best range when holding the transmitter away from your body and
placing it above your head.
- Always check the batteries in your transmitter and receiver before usage and
replace the batteries if necessary.
- The battery performance will decline when used in colder temperatures
(below 0° C)
12. MAXIMIZING THE DISTANCE
Typical range
Minimum range
Maximum range
1) When inserting the batteries into the unit, make sure the battery matches
the positive or negative polarity.
2) Please remove the batteries from the device if it will not be used or placed
in storage for a long time.
3) If you are storing the batteries, do not store it together with metal products.
4) If the battery expires, replace the battery with a new one even if it has some
capacity left.
11. Using the Battery Correctly
