60
BATTERY CHARGER
The battery charger and charging cables allow you
to charge both the transmitter and receiver at the
same time. The battery charger is designed for a
220-volt wall outlet (U.S.A. 110-volt AC chargers
and 12-volt field charger for Lithium-Polymer
batteries for your automobile are also available.).
To use the battery charger for the two-dog unit,
combine both sets of battery charging (splitter)
cables as shown. This enables you to charge the
transmitter and both receivers at the same time.
NOTE :
Only use Dogtra-approved Lithium-
Polymer Battery Chargers for your Dogtra e-collar.
This will prevent any damage that can be incurred
from attempting to use a different charger.
BATTERY CHARGER
Charging Cable
220 volt
Charger
Wall Outlet
Two-dog unit only
61
TESTING
1. To activate your
place the red dot on the back of the transmitter to
the red dot on the receiver/collar.
Hold the two red dots together for a moment until
the green colored LED indicator light comes on.
2. Place the Test light included in the package
contents on the contact points as shown in the
diagram.
TESTING YOUR
COLLAR
