manualshive.com logo in svg

Dogtra 2500T&B Series, Owner'S Manual

Share
Download
Dogtra 2500T&B Series Owner'S Manual Download Page 23

BASIC MAINTENANCE

43

BASIC MAINTENANCE

Be sure that the rubber charging plugs are always

secured when the collar is in use.  If your plugs

break or are ripped, please contact Customer Service

at [email protected] or (888) 811-9111 to obtain

replacements. 

After each session, carefully inspect your unit for

any missing parts, or casing damage.  Broken

casings on either the receiver or transmitter may

affect the waterproof guarantee of the unit. The

transmitter antenna should be secured and tight for

optimum performance. Rinse the unit after each

session and clean off any dirt or debris.

Storage Maintenance

Your unit should be fully charged for 2 hours before

extended storage.  During storage, the unit should be

charged every 3 months for 2 hours, and once before

the first use.

When traveling, try to store your units in room or

slightly warmer temperatures, do not transport the

unit exposed in extreme climates.

Troubleshooting :

If you suspect your unit is malfunctioning please

refer to the “Troubleshooting Guide” before you

send your unit in for service.

If you have any questions or concerns, you may

direct your inquiries to [email protected] or call

(888) 811-9111. 

42

ACCESSORIES

The following items may be purchased separately by
calling our customer service at (888) 811-9111. You
may also browse the selection at shop.dogtra.com.  

European Charger

Designed for use with 230V AC electrical outlets in
Europe.

Field Auto Charger 
(for Lithium-Polymer Battery only)

Designed for use with the 10-volt cigarette lighter in
your car. 

ACCESSORIES

Summary of Contents for 2500T&B Series





























Reviews:

No comments

Brands by name

Popular brands

Load more brands