manualshive.com logo in svg

Dogtra 2500T&B Series, Owner'S Manual

Share
Download
Dogtra 2500T&B Series Owner'S Manual Download Page 16

28

DESCRIPTION OF RECEIVER / COLLAR PARTS

Receiver Battery Charging Receptacle and
Rubber Plug 

On the inside of the receiver/collar, next to the
collar strap, is a battery-charging receptacle with a
rubber plug.  

29

BATTERY CHARGER

The battery charger and charging cables allow you

to charge both the transmitter and receiver at the

same time. The battery charger is designed for a

120-volt wall outlet (European 230-volt AC

chargers and 10-volt car charger for Lithium-

Polymer batteries are also available.). 

To use the battery charger for the two-dog unit,

combine both sets of battery charging (splitter)

cables as shown. This enables you to charge the

transmitter and both receivers at the same time.  

Note: 

Only use Dogtra-approved Lithium-Polymer

Battery Chargers for your Dogtra e-collar. This will
prevent any damage that can be incurred from
attempting to use a different charger. 

BATTERY CHARGER

Charging Cable 

120 volt
Charger 

Wall Outlet

Two-dog unit only

* The unit will be fully waterproof with or

without the rubber plug. If the dog was in salt-
water, be sure to rinse the receiver and
charging port with clean water, and let air dry.

Summary of Contents for 2500T&B Series





























Reviews:

No comments

Brands by name

Popular brands

Load more brands