Battery Charging Procedure
Note :
The unit has a partial charge when it leaves
the Dogtra facility, upon receipt of the collar, be
sure to give it a full 2-hour initial charge before the
first use.
1. Attach the charging cables to both the transmitter
and receiver(s), as shown on page 38.
2. Plug the charger into a 120-volt wall outlet or,
if using the accessory field charger, plug into a
cigarette lighter only for Lithium-Polymer
battery (Use a 230-volt European charger for
39
CHARGING THE BATTERIES
Recharge the unit if :
The LED indicator light on the receiver/collar is
emitting a red color.
If the 3 bar indicator on the transmitter LCD
shows just 1 bar.
The indicator light on the transmitter or receiver
will not come on.
The indicator light on the transmitter or receiver
comes on momentarily, but will not stay on
when the “Constant” button is pushed.
uses Lithium-Polymer
batteries.
1. Charge the unit before using the unit for the first
time.
2. Do not charge the batteries near any flammable
substances.
3. Fully charge the batteries if the unit is to be
stored without use for a period of 3 months or
more.
CHARGING THE BATTERIES
38
CHARGING THE BATTERIES
