30
TESTING
1. To activate the receiver/collar, place the red dot on
the back of the transmitter to the red dot on the
receiver/collar. Hold the two red dots together for
a moment until the LED light on the receiver/collar
comes on. The indicator light will come on for a
moment then blink once every 4 seconds, showing
that the collar is ready to use (If the indicator light
is red, or if there is only 1 bar showing on the
battery icon on the LCD transmitter screen, the
unit needs to be charged.).
TESTING YOUR
COLLAR
31
TESTING
2. Place the test light, included in the package
contents, on the contact points as shown in the
diagram.
3. Turn the transmitter on by pressing the blue button
on the right side of the transmitter until the LCD
screen illuminates. The LCD screen shows the
amount of battery life remaining and the LED
blinks once every 4 seconds.
4. Watch the test light as you push the “Nick” button
on the transmitter. It should light for just a
moment. The higher the intensity, the brighter the
test light will be.
5. Watch the test light as you push the “Constant”
button on the transmitter. It should light for as
long as the button is pressed. However, as a safety
feature, the receiver/collar will automatically stop
stimulation if the constant button is depressed for
12 seconds or longer.
6. Turn the Rheostat Intensity Dial on the transmitter
clockwise and then counterclockwise. The test
light should glow brighter with higher levels of
stimulation and dimmer with lower levels. When
you change the intensity dial, the number on the
LCD screen will change as well.
