background image

uses Lithium-

Polymer batteries. 

1. Charge the unit before using the unit for the

first time.

2. Do not charge the batteries near any

flammable substances.

3. Fully charge the batteries if the unit is to be

stored without use for a period of 3 months or
more.

CHARGING THE BATTERIES 

26

CHARGING THE BATTERIES

Battery Charging Procedure  

Note

: The unit has a partial charge when it

leaves the Dogtra facility, upon receipt of
the collar, be sure to give it a full 2-hour
initial charge before the first use.  

1. Attach the charging cables to both the

transmitter and receiver(s), as shown on
page 26. 

2. Plug the charger into a 120-volt wall outlet

or, if using the accessory field charger, plug
into a cigarette lighter only for Lithium-
Polymer battery. (Use a 230-volt European
charger for Europe.) When properly plugged
in, all indicator lights should glow red.

27

CHARGING THE BATTERIES

Recharge the unit if: 

The indicator light on the collar is emitting a
red color.
If the 3 bar indicator on the transmitter LCD
shows just 1 bar. 
The indicator light on the transmitter or
receiver will not come on.
The indicator light on the transmitter or
receiver comes on momentarily, but will not
stay on when the “Constant” button is pushed.

Summary of Contents for 2300NCP Advance Series























Reviews: