DMF series - Torque reaction arms
60353-12/20
14
2. STARTING UP
2.1 Workstation description
Torque reaction arm is fixed on a stable workstation equipped with a tightening
tool. Mounting can be horizontal or vertical:
Horizontal mounting
Vertical mounting
Maximum angle of the arm is
determined by the maximum tool
torque (refer to paragraph 2.4.1). The
balancer is attached to the tool.
Balancing kit is mounted on the arm.
Information
The global stroke must be considered before workstation layout.
Warning
The last 100mm of arm stroke should not be routinely used to avoid
premature ring wear.
