Devices use the fade time and their current and required desired bright-
ness to calculate the dimming speed. This ensures all devices complete
the dimming process at the same time, assuming they all support the
minimum/maximum values in question. The table below provides an
overview of the dependence between levels and times:
Fade levels
1
0.7 s
6
4.0 s
11
22.6 s
2
1.0 s
7
5.7 s
12
32.0 s
3
1.4 s
8
8.0 s
13
45.3 s
4
2.0 s
9
11.3 s
14
64.0 s
5
2.8 s
10
16.0 s
15
90.5 s
The fade time is set in the subsequent dialogue:
G r :
0 2
/ F a d e t i m e
E s c
-
0 5
+
O K
①
②
③
④
Pressing ② and ③ configures the fade time (factory default is 5). After
confirming by pressing ④, this value is adopted and the next menu
appears. Pressing ① takes you back to the higher-level menu.
5.6.4
Deleting lighting groups
This menu item enables you to delete lighting groups. Please note:
»
when groups are deleted, devices may sometimes lose their assign-
ment and it may no longer be possible to address them.
»
The control and feedback addresses of affected groups no longer
respond.
»
Groups are deleted from previously defined lighting scenes and are
no longer addressed by them.
Select the following menu item by pressing key ② or ③:
26
Doepke